Technology Updates in English And Hindi भाषा !!!

Friday, January 17, 2020

MPLS L2 Circuit || pseudowire / xconnect

MPLS L2 Circuit Configuration Example on Cisco IOS Software - Version 15.5(2)T


On R4 Configuration
{
pseudowire-class R2-To-R4-L2MPLS-CircuiT

 encapsulation mpls
    
interface Ethernet0/2
 no ip address
 xconnect 1.1.1.2 1 encapsulation mpls pw-class R2-To-R4-L2MPLS-CircuiT
                R2 Loop back IP and Virtual Circuit ID is 1 (Same Unique ID For Both end to get communication)
}


On R2 Configuration 

pseudowire-class R2-To-R4-L2MPLS-CircuiT
 encapsulation mpls

interface Ethernet0/2.10
 encapsulation dot1Q 10
 xconnect 1.1.1.4 1 encapsulation mpls pw-class R2-To-R4-L2MPLS-CircuiT
}


Output: on R4




L2 Circuit Configured in between Router R2 To R4 For R5 Customer.
R5 is HUB Location and R8 is Spoke Location.
Tested with DHCP configuration on R5, so that VPC System get DHCP IP addressing.  
 

No comments:

Post a Comment